The aerospace industry operates at the intersection of extreme physical forces and microscopic precision. For the Hellenic Aerospace Industry (EAB), their facility in Tanagra, Greece, stands as a critical hub for strategic maintenance and manufacturing. In 2026, Osis Group was commissioned to deliver a specialized flooring solution for a 1,000 m² section of this facility—a project where the margin for error was virtually non-existent and the environmental standards were among the most stringent in the world.
The Challenge: Beyond Standard Industrial Flooring
When dealing with aerospace components and sensitive electronic systems, a "standard" industrial floor is insufficient. EAB presented a multi-faceted technical brief that required Osis Group to address three primary threats: electrostatic discharge (ESD), airborne molecular contamination (VOCs), and structural vibration tolerances.
The facility houses sensitive aerospace systems where a single static spark could lead to catastrophic component failure. Simultaneously, the manufacturing process requires a cleanroom environment where the air must remain free of chemical outgassing. Finally, the installation of high-precision testing equipment—specifically a specialized "shaker base" used for stress-testing aircraft parts—demanded a level of floor flatness (super-flatness) that exceeds typical Category 1 standards.
Engineering Requirements: ISO AMC Class -4 and Beyond
The technical requirements for this project were defined by two critical benchmarks:
- Chemical Integrity (Low Offgassing): To maintain the integrity of the cleanroom atmosphere, the flooring system had to achieve ISO AMC (Airborne Molecular Contamination) class -4 VOC concentration. This meant the floor could not release volatile organic compounds that might settle on sensitive optical or electronic surfaces.
- Uncompromising Levelness: The general area required a surface deviation of no more than 2mm per linear meter. However, the shaker base area—the heart of the testing facility—demanded an incredible precision of less than 1mm deviation. Achieving this in a resinous application requires specialized screeding techniques and meticulous substrate preparation.
The Osis Group Approach: A Specialized ESD System
To meet these exacting standards, Osis Group deployed a multi-layered, conductive resin system integrated with advanced substrate leveling technologies.
1. Substrate Preparation and Precision Grinding
The project began with the mechanical preparation of the existing concrete base. Using diamond grinding and captive shot-blasting, our team ensured a perfect mechanical bond for the resin system. To meet the <1mm deviation requirement for the shaker base, we employed precision laser-leveling measuring tools to identify high and low spots, followed by the application of a high-strength, high-flow self-leveling cementitious underlayment.
2. The Conductive Infrastructure
To handle the ESD requirements, a network of copper grounding tapes was installed across the floor, connected to the building's grounding system. This ensures that any static charge generated by personnel or equipment is immediately and safely dissipated through the floor, rather than discharging into sensitive aerospace hardware.
3. Low-VOC Epoxy Application
The final layer was a specialized, low-outgassing ESD epoxy resin. Unlike standard epoxies, this material is specifically formulated to minimize the release of VOCs during and after the curing process. Our team applied this in a controlled environment to ensure that no dust or airborne particles contaminated the finish, maintaining the ISO AMC class -4 integrity throughout the installation.
Technical Specifications and Results
- Location: Tanagra, Greece
- Area: 1,000 m²
- Floor Type: Conductive ESD Resin with Low-VOC Cleanroom Specifications
- Flatness Achieved: <2mm per meter (General), <1mm per meter (Shaker Base)
- Chemical Standard: ISO AMC Class -4 (Low Offgassing)
- Industry: Aerospace & Defense
A Foundation for the Future of Aerospace
The completion of the EAB project in Tanagra represents a milestone in high-specification industrial flooring in Greece. By successfully navigating the complexities of ESD protection and low-offgassing cleanroom requirements, Osis Group has provided the Hellenic Aerospace Industry with a world-class platform for their strategic operations.
The precision achieved at the shaker base ensures that EAB’s testing equipment can operate without interference from structural vibrations or floor irregularities, while the ESD system protects the sophisticated electronic "brains" of modern aircraft. At Osis Group, we don't just lay floors; we build the technical foundations that allow high-stakes industries to reach new heights.




